3D Wallpaper Price in Karachi 2026: Per Sq Ft, Per Roll & Wall Rates

3D wallpaper in Karachi costs roughly Rs. 400 to Rs. 900 per sq ft installed in 2026, depending on the material and whether it is a repeat-pattern roll or a custom printed mural. Budget self-adhesive 3D foam sheets start around Rs. 80–200 per sq ft, while premium imported or custom murals can reach Rs. 1,500 per sq ft. A single 10 × 10 ft accent wall therefore lands between roughly Rs. 40,000 and Rs. 1,50,000.

This guide gives the real numbers: per sq ft, per roll, and per wall size, with labour separated so you can see where the money goes. All figures are estimated ranges for Karachi, 2026, standard 10 ft ceiling height, supply plus basic installation. Final quotes vary with wall condition, material origin and access.

3D Wallpaper Price by Type (2026)

These are installed rates for a normal wall in good condition. If the wall needs plaster repair, primer or old wallpaper removal, add Rs. 20–60 per sq ft. For material-only guidance and design differences, see our 3D vs regular wallpaper comparison.

Per Sq Ft vs Per Roll — How the Pricing Actually Works

Most imported wallpaper is sold in rolls, not by area. A standard roll is about 0.53 m wide and 10 m long — roughly 5.3 sq m, or about 57 sq ft gross. After pattern matching and trimming, expect around 48–52 sq ft of usable coverage per roll.

So when a shop quotes Rs. 8,000 per roll, that is roughly Rs. 155 per sq ft for material if you get full usage — but closer to Rs. 170–190 per sq ft after waste. Add installation at Rs. 60–120 per sq ft and the installed rate lands near Rs. 250–300 per sq ft for a basic vinyl roll. This is why per-roll prices look low but the finished job costs more.

3D murals are usually printed to size and priced per sq ft or per panel, so there is less waste — but the printing and design cost is higher. Always ask the vendor whether the quote is material only, material plus labour, or turnkey.

What Actually Changes the Price

Material origin. Local and Chinese vinyl is the cheapest. Korean and Turkish textured wallpaper costs more but resists humidity better. This matters in Karachi’s coastal climate.

Wall condition. Smooth, painted walls need little prep. Cracked plaster, damp patches or old wallpaper add labour and materials.

Design complexity. A repeating pattern is cheaper than a custom mural that must be centred on the wall. Large scenes and custom artwork add design and printing cost.

Wall height and access. Double-height walls, stairwells and tight corners need scaffolding or extra labour.

Number of walls. Small jobs carry a minimum charge. One accent wall often costs more per sq ft than a full room because setup and travel are the same.

Area of Karachi. Labour in DHA, Clifton and Bahria typically runs 10–25% higher than in Gulshan, North Nazimabad or PECHS because of travel and parking.

Real Cost Examples by Wall Size

Full-room figures subtract roughly 10% for doors and windows but add 10–15% material waste. If you want the total room budget including paint, furniture and lighting, see our interior design cost in Karachi breakdown.

Installation Charges — What You Should Pay

Labour for regular wallpaper is usually Rs. 60–90 per sq ft; 3D embossed rolls and murals run Rs. 90–150 per sq ft because alignment and positioning take longer. Old wallpaper removal adds Rs. 20–40 per sq ft. Wall primer and minor patching are often quoted separately.

A reliable install team will ask for wall photos or a site visit before quoting. If someone gives a final price over the phone without seeing the wall, treat it as an estimate only — the most common cost overrun in Karachi wallpaper jobs is undisclosed wall damage.

Cheap vs Premium: What You Actually Get

At Rs. 100–200 per sq ft you are buying foam or thin self-adhesive sheets. They are fine for a temporary look or a child’s room, but seams show and edges lift in humidity. At Rs. 400–700 per sq ft you get PVC-backed embossed wallpaper that resists moisture, hides small wall defects and looks good for years. Above Rs. 700 per sq ft you are paying for imported texture, custom printing and design work — the visual difference is real on a feature wall, but not worth it on a wall nobody notices.

If humidity damage is your main worry, compare wallpaper with rigid PVC wall panels, which cost more upfront but handle damp walls far better. Our wallpaper vs PVC panel guide explains when each makes sense.

3D Wallpaper vs Other Wall Finishes — Cost Comparison

Wallpaper is rarely chosen in isolation. Homeowners usually compare it with paint, PVC panels and wall molding, and the cheapest option per sq ft is not always the cheapest over ten years. The table below puts the main Karachi options side by side using 2026 installed rates.

On a pure cost-per-square-foot basis, paint is the cheapest and wallpaper sits in the middle. But paint cannot reproduce a textured brick wall or a printed mural, and wallpaper covers cracks that would show through paint. If the wall is damp, moving to PVC wall panels usually costs less over ten years than repeatedly replacing peeling wallpaper. For a wider view of finishes, see our wall finishing solutions guide for Pakistan.

How to Get an Accurate Quote in 5 Steps

1. Measure each wall — width × height, and note doors and windows.
2. Send photos of the wall surface, including any cracks or damp patches.
3. Ask for material and labour separately so you can compare quotes fairly.
4. Confirm wastage allowance — it should be 10–15%, stated in writing.
5. Ask about after-service for lifting edges or seams within the first year.

For design and material selection before you finalise a budget, browse our 3D wallpapers in Karachi or read the wallpaper buying guide.

Frequently Asked Questions

How much does 3D wallpaper cost per square foot in Karachi?
About Rs. 400–700 per sq ft installed for standard 3D embossed wallpaper, Rs. 600–900 for imported textured types, and Rs. 700–1,500 for custom murals (2026 estimates).

How much wallpaper do I need for a 10 × 10 ft wall?
100 sq ft of wall needs about 2 rolls of standard 0.53 × 10 m wallpaper once you allow for pattern matching and trimming.

Is 3D wallpaper cheaper than PVC panels?
Usually yes. 3D wallpaper starts lower per sq ft, but PVC panels last longer and handle damp walls better, so the long-term value depends on the wall.

Does installation cost extra?
Yes. Labour is typically Rs. 60–120 per sq ft on top of material, and higher for murals and double-height walls.

Can I get 3D wallpaper for one wall only?
Yes, and it is the most cost-effective way to use it. Expect a minimum job charge if the wall is very small.

Why is one shop quoting Rs. 300 per sq ft and another Rs. 900?
They are almost certainly quoting different products. Rs. 300 is usually thin vinyl material-only pricing, while Rs. 900 is an installed imported or mural rate. Always compare the same specification.

Does wallpaper price include removal of old wallpaper?
Usually not. Removal and wall preparation add roughly Rs. 20–60 per sq ft and should be listed separately in the quote.